LoadSlammer 1000


The LoadSlammer 1000 is for verification of high performance multiphase power delivery circuits with no additional test equipment.



SKU: LS1000 Category:


The LoadSlammer 1000 takes the same great features of the LoadSlammer 50 and turns them towards testing and optimizing high current, high performance multiphase power delivery circuits. Just like the LoadSlammer 50, the LoadSlammer 1000 can test power management solutions without any additional test equipment and functions using the same free, intuitive GUI that the LoadSlammer family shares.

User Guide



1. Minimum pulse width is 6uS
2. Active window >250µs
3. Circuit inductance can significantly limit the performance of the LoadSlammer when running high slew rates. For situations requiring high slew rates, the LoadSlammer must be as close to the load as possible, ideally soldered directly onto the board to bypass the connector inductance. It is our recommendation that the LoadSlammer 1000 be soldered down for any testing with slew rates over 500 A/µS.
4. To ensure accuracy check that a high load current is supplied, especially for high slew rate situations.


A USB-A to USB Mini-B cable is used to connect the LoadSlammer to a computer.

If you have a technical requirement not met by our current products, let us know. We make custom solutions for our customers’ specific needs.


There are no reviews yet.

Be the first to review “LoadSlammer 1000”

You may also like…