The Digital Power Management Bus Blaster is SVI3, SVID, AVS, and PMBus compliant (with protocol specific plugin). The firmware is upgradable through a remote server. Designed to be used as a standalone device or can be used in conjunction with one of the ProGrAnalog LoadSlammer GUI for a user-friendly and comprehensive power management experience.
The LoadSlammer Protectors are designed for soldering down onto DUT boards.
Enables soldering to PCBs and MLCC caps, to test a DUT without damaging the LoadSlammer or soldering the load blade of the LoadSlammer directly.
Power Management IC Development Tools Cooling Solution for AMD SP5/SP5+ Transient Test Kits.
Sensor Cables / Actuator Cables SMB to BNC output data lead for connecting SMB output LSP1000RS LSP200 or LSP40. Used for viewing the current and voltage waveforms.
This 360A DC PTO Wide load board can be soldered directly to a Motherboard to load systems that do not have easily accessible locations to attach wires to directly.
Featuring 4oz copper and convenient Wurth RedCube connectors allow for heavy-duty cables to be connected to it easily and quickly.
This 360A DC PTO Narrow load board can be soldered directly to a Motherboard to load systems that do not have easily accessible locations to attach wires to directly.
Featuring 4oz copper and convenient Wurth RedCube connectors allow for heavy-duty cables to be connected to it easily and quickly.
120A Horizontal DC PTO Board with small pass-through LoadSlammer Connector. Can be soldered or inserted into large Samtec connector.
The LoadSlammer PTO small connector features 4oz, 4 layer copper, and convenient Wurth RedCube connectors that allow for heavy-duty cables to be connected to it the PTO board repeatedly and quickly. A single pair of connectors enable 120A of continuous current to be connected and loaded from a test board to a lab bench load.
120A Horizontal DC PTO Board with large pass-through LoadSlammer connector. Can be soldered or inserted into large Samtec connector.
The LoadSlammer PTO large connector features 4oz, 4-layer copper and convenient Wurth RedCube connectors allow for heavy-duty cables to be connected to it the PTO board repeatedly and quickly. A single pair of connectors enable 120A of continuous current to be connected and loaded from a test board to lab bench load.
The LoadSlammer Protector is designed for soldering down onto DUT boards it has a small Samtec connector blade on the bottom, large Samtec connector on top.
Enables soldering to PCBs and MLCC caps, to test a DUT without damaging the LoadSlammer or soldering the load blade of the LoadSlammer directly.
The LoadSlammer Protector Mini is designed for soldering down onto DUT boards it has a large Samtec connector blade on the bottom, large Samtec connector on top.
Enables soldering to PCBs and MLCC caps, to test a DUT without damaging the LoadSlammer or soldering the load blade of the LoadSlammer directly.
Sign up with your email address to receive news and updates.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
